FLUKE MILLIAMP PROCESS CLAMP METER 773

• DC voltage measurement to verify 24 V power supplies or voltage I/O signals

• Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal

• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

– Output mA signal enables a logging DMM (289) or other device to record the 4 to 20 mA signal without breaking the loop

• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal

– Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA isolators

• Voltage output linear ramp or 25 % step output

– Automatically change the voltage output for remote testing